Filter
Top Products
66
a Press Clear.
To confirm you are installing a new drum
unit, press 1.
b When the LCD shows Accepted, close
the front cover.
Cleaning the scanner glass A
a Turn off the machine’s power switch.
Unplug the telephone line cord first,
disconnect all cables, and then unplug
the power cord from the AC power
outlet.
Note
(For FAX-2840 and MFC-7240)
To prevent you from losing any important
messages, see Transferring your faxes or
Fax Journal report uu page 74.
b Lift the control panel cover (1). Carefully
remove dirt from the glass strip (2) and
the white bar (3) above it with a soft lint-
free cloth moistened with water.
c Close the control panel cover.
Note
In addition to cleaning the glass strip with
a soft lint-free cloth moistened with water,
run your finger tip over the glass to see if
you can feel anything on it. If you feel dirt
or debris, clean the glass again
concentrating on that area. You may need
to repeat the cleaning process three or
four times. To test, make a copy after each
cleaning.
d Plug the machine’s power cord back into
the AC power outlet first, connect all
cables, and then plug in the telephone
line cord. Turn on the machine’s power
switch.