Filter
Top Products
REMOTE FAX OPTIONS
9 - 2
Programming Paging Number
When Paging is selected, your machine dials the pager number you’ve
programmed, and dials your Personal Identification Number (PIN) when
connected, to activate your pager and let you know you have a fax
message in the memory.
1
For the FAX, press
Function
,
8
,
1
.
For the MFC, press
Function
,
1
,
8
,
1
.
2
Press or until the screen displays
PAGING?
SELECT <- -> & SET
and press
Set
.
3
Enter your pager phone number (up to 20
PAG#:
ENTER & SET
digits) followed by and press
Set
.
Do not include the area code if it is the same as that of your machine.
For example,
1
8
0 0
5 5 5
1
2 3 4
.
4
If your pager requires a PIN, enter the PIN, press , press
Redial/Pause
, enter
your fax number, then press
and press
Set
.
For example,
1
2 3 4 5
Redial/Pause
1
8
0 0
5 2
1
2 8 4 6
.
—OR—If you do not need a PIN, press
Redial/Pause
, enter the fax number,
then press
and press
Set
.
For example,
Redial/Pause
1
8
0 0
5 2
1
2 8 4 6
.
5
Press
Stop
to exit.
You cannot change a Paging number or PIN remotely.
Setting Fax Storage
If you set Fax Storage to ON, you will be able to retrieve fax messages
from another location, using Fax Forwarding, Paging, or Remote Retrieval
functions. The screen will indicate when you have a fax stored in
memory. (See Remote Retrieval, page 9-3.)
1
For the FAX, press
Function
,
8
,
2
.
For the MFC, press
Function
,
1
,
8
,
2
.
2
Press or to select ON (or OFF) and
FAX STORAGE:OFF?
SELECT & SET
press
Set
.
3
Press
Stop
to exit.
If there are faxes in memory when you turn Fax Storage to OFF, the screen
prompts you to erase any faxes in memory.
If you press
1
, all fax data is erased and
ERASE ALL FAX?
1.YES 2.NO
Fax Storage is turned off. If you press
2
,
data is not erased, and Fax Storage remains on.