Filter
Top Products
Wireless Configuration for Macintosh
®
74
5
Note
• If your target Ad-hoc network is not broadcasting the SSID name and does not appear on the list, you can
manually add it by clicking the Add button. Follow the on-screen instructions for entering the Name (SSID)
and the Channel number.
• If the list is blank, check if the machine is within range for wireless communication. Then, click Refresh.
n If your network is not configured for Authentication and Encryption, the following screen will appear. To
continue installation, click OK and go to p.
o If your network is configured for Authentication and Encryption, the following screen will appear. When
configuring your Brother wireless machine, you must ensure that it is configured to match the
Authentication and Encryption settings of your existing wireless network. Choose the
Authentication Method and Encryption Mode from the pull-downs in each setting box. Then enter the
Network key and click Next. Go to q.