Filter
Top Products
Configuring your machine for a wireless network
20
3
Network key 3
There are some rules for each security method:
Open system/Shared key with WEP
This key is a 64-bit or 128-bit value that must be entered in an ASCII or HEXADECIMAL format.
WPA-PSK/WPA2-PSK and TKIP or AES
Uses a Pre-Shared Key (PSK) that is more than 7 and less than 64 characters in length.
Configuring your machine for a wireless network 3
There are three methods to configure your wireless network machine; by using the machine control panel
(recommended), using the SecureEasySetup™ software and using the automatic installer application on the
CD-ROM.
Using the Setup Wizard from the control panel 3
You can configure your print server by using the Setup Wizard function. This is located in the LAN menu
on the machine’s control panel. See to the steps below for further information.
a Press Menu.
b Press a or b to select LAN.
Press OK.
c Press a or b to select Network I/F.
Press OK.
d Press a or b to select WLAN.
Press OK. The wireless network interface will be activated.
e Press a or b to select Setup WLAN.
Press OK.
f Press a or b to select Setup Wizard.
Press OK.
g Start to search for a SSID around the machine.
64 (40) bit ASCII: Uses 5 text characters.e.g. “WLLAN” (this is case sensitive).
64 (40) bit hexadecimal: Uses 10 digits of hexadecimal data.e.g. “71f2234aba”
128 (104) bit ASCII: Uses 13 text characters.e.g. “Wirelesscomms” (this is case
sensitive)
128 (104) bit hexadecimal: Uses 26 digits of hexadecimal datae.g.
“71f2234ab56cd709e5412aa2ba”