Filter
Top Products
Configuring your machine for a wireless network
24
3
f You can now change the wireless settings.
Note
• If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the
device will appear as APIPA in the BRAdmin Professional utility screen.
• You can find the node name and Ethernet address (Node Address above) by printing out the Network
Configuration List. See Printing the Network Configuration List on page 81 for information on how to print
the Network Configuration List on your print server.
Using the control panel to change the print server settings 3
You can configure and change the print server settings using the control panel LAN menu. See Control panel
setup on page 70.
Using other methods to configure your machine for a wireless network 3
You can configure your machine for a wireless network using other methods. See Other ways to set the IP
address (for advanced users and administrators) on page 100.