Brother NC-140w Printer User Manual


 
1
1
1
Overview 1
The Brother machine can be shared on a 10/100 MB wired Ethernet network using the internal network print
server. The print server supports various functions and methods of connection depending on the operating
system you are running on a network supporting TCP/IP. These functions include printing, scanning, PC-FAX
send, PC-FAX receive, PhotoCapture Center™, Remote Setup and Status Monitor. The following chart
shows what network features and connections are supported by each operating system.
1
Not available for DCP models.
2
A wireless network connection is supported only between the Brother machine and an access point for PC’s running Windows
®
XP Professional
x64 Edition.
To use the Brother machine through a network, you need to configure the print server, and set up the
computers you use.
For Wireless Users:
To achieve optimum results with normal every day document printing, place the Brother machine as close to
the network access point (router) as possible with minimal obstructions. Large objects and walls between the
two devices as well as interference from other electronic devices can affect the data transfer speed of your
documents.
Introduction 1
Operating
Systems
10/100
BASE-TX
Wired
Ethernet
(TCP/IP)
IEEE
802.11b/g
Wireless
Ethernet
(TCP/IP)
Printing
Scanning
PC-Fax
Send
1
PC-FAX
Receive
1
Photo
Capture
Center™
Remote
Setup
1
Status
Monitor
Windows
®
98/98SE/Me/
2000/XP
/XP
Professional
x64 Edition
2
rrrrrrrrr
Mac OS
®
X
10.2.4 or
greater
rrrrr rrr