Filter
Top Products
78
On 3/4" (18 mm) tape:
CHECK THE NUMBER
OF LINES! 5 MAX
On 1/2" (12 mm) tape:
CHECK THE NUMBER
OF LINES! 3 MAX
On 3/8" (9 mm) and 1/4"
(6 mm) tape:
CHECK THE NUMBER
OF LINES! 2 MAX
• This message appears if you
try to print or use the
Preview function when the
number of lines in the text is
greater than the maximum
possible for the installed
tape.
• Reduce the number of lines
or install a wider tape.
CHOOSE COPIES
LESS THAN 1000!
• This message appears if
more than 1000 copies were
selected with the Print
Option functions.
• Note the number of copies
plus the number of
sequential labels cannot
exceed 1000.
• Select less than 1000 copies.
CUTTER ERROR!
• This message appears if the
tape cutter button was
pressed when p was
pressed or the tape was
being fed.
• Release the tape cutter
button. If p was pressed,
press f to feed out any
printed tape.
• If the problem cannot be
corrected, contact your
service representative.
IMAGE CHARACTER
SIZE ERROR!
• This message appears if a
wide user-defined character
image is entered when the
Vertical Label Type mode
is selected.
• Change the Label Type
mode or use a tall user-
defined character image.
INPUT ABCD AT
BEGIN & END!
• This message appears if a
letter between A and D has not
been entered at the beginning
and end of the bar code data
when the
CODABAR
protocol is selected.
• Enter a letter between A and
D at the beginning and end
of the bar code data.
INSERT 1" TAPE
• This message appears if a 1"
(24-mm)-wide tape cassette
is not installed when
printing an Auto Format
template created for 1" (24-
mm)-wide tape.
• Install a 1" (24-mm)-wide
tape cassette.
INSERT 24mm TAPE
Error Message Cause Solution
PT75007600us.book Page 78 Wednesday, February 27, 2008 2:50 PM