Filter
Top Products
6
Chapter
Connecting the Power Cord
Memory Storage
Your machine is equipped with an internal battery that will keep the date and time information for
up to about 15 hours (FAX-T76), about 9 hours (FAX-T74) after power has been cut off. After that
time, the date and time will be lost and you will have to re-enter the information. In the event of a
power failure, all settings in the INITIAL SETUP, SETUP RECEIVE, SETUP SEND, SET
QUICK-DIAL, REMOTE FAX OPT and SETUP TAD functions are stored permanently except
POLLING RX, CONTRAST, RESOLUTION, OVERSEAS MODE, CALL RESERVE,
TIMER and POLLED TX.
On the FAX-T76, it will retain the data for Out-of-Paper Reception, Memory Transmission and
Message Manager for up to 6 hours after a power interruption.
Setting the Date and Time
The screen displays, the date and time you set, whenever the machine is in stand-by mode. It will
print the date and time on every fax you send.
In the event of a power failure, the machine maintains date and time information for about 15 hours.
All other settings remain unaffected.
1
Press Menu/Set, 1, 2.
2
Enter the two digits of the year, and press Menu/Set. “01” is retgistered as 2001 in the machine.
3
Enter two digits for the month and press Menu/Set.
4
Enter two digits for the day and press Menu/Set.
5
Enter the time in 24 hour format and press Menu/Set.
6
Press Stop to exit.
Using the speakerphone
Instead of using the handset, you can press Speaker Phone.
On the FAX-T76, you can switch from handset to Speakerphone by pressing Speaker Phone, then
replacing the handset. You can switch from Speakerphone to handset by lifting the handset.
Automatic Redial
See “Dialling a Number” on page 22.
If the line is busy when you send a fax using automatic transmission, the machine will automatically
redial up to 4 times (3 times for Ireland) at 2 minute intervals.
• This fax must be earthed using a 3-pin plug.
• Since the machine is earthed through the power outlet, you can protect
yourself from potentially hazardous electrical conditions on the telephone
network by keeping the power to your machine on when you connect it to
a telephone line. Similarly, you can protect yourself when you want to
move your machine, by disconnecting the telephone line first, and then
the power cord.
• Lightning and power surges can damage this product! We recommend
that you use a quality surge protection device on the AC power line as well
as on the telephone line, or unplug the lines during a lightning storm.