Filter
Top Products
78
Chapter 14
Function Selection Table
1. INITIAL SETUP
2. SETUP RECEIVE
Function Description Factory Set Chapter
1. TONE/PULSE Selects the dialling mode. TONE See
Preparation
and Simple
Use Guide
2. DATE/TIME Enter date and time for LCD display
and to print on transmissions.
—
3. STATION ID Program the name, fax number and
telephone number to appear on each
transmitted page.
—
4. BEEPER Adjust the volume level of the beeps
when you press a key, an error
occurs or a document is sent or
received.
LOW 1
5. PBX Turn on if PABX (Private
Automatic Branch Exchange) is
connected to your machine.
OFF 1
6. CLOCK CHANGE Adjust the machine’s clock by one
hour for summer/winter time.
—1
Function Description Factory Set Chapter
1. RING DELAY Number of rings before the machine
answers in F/T, FAX or TAD
(Message Manager) mode.
RING DELAY:02
TOLL SAVER:OFF
(FAX-T76 Only)
3
2. F/T RING TIME Sets the time for “F/T pseudo-ring”
in F/T mode.
30 3
3. FAX DETECT Receive fax messages without
pressing the Start key.
ON 3
4. REMOTE CODE Enter code to activate or deactivate
machine from a remote location or to
transfer voice call from DECT
cordless phone to the machine.
OFF
(* 5 1, # 5 1,
* 8 1)
8
5. REDUCTION Reduces size of image. AUTO 3
6. MEM.RECEIVE Automatically stores any incoming
faxes in its memory if it runs out of
paper.
ON 3
7. POLLING RX You call another fax machine to
receive a fax from it.
—9