Cabletron Systems 2E43-51 Switch User Manual


 
Chapter 5: Local Management
5-88 2E43-51/2E43-51R User’s Guide
bridge:
Syntax: bridge [ENABLE/DISABLE] [IFNUM/ALL]
Description: The bridge command allows bridge
management to be enabled or disabled at the
user’s request, either one at a time or all at once.
Specifying a single interface number will affect
the bridging status of that interface, while
specifying ALL will affect every interface.
Options: Not Applicable
Example:
defroute:
Syntax: defroute
defroute [interface number] [IP address]
defroute delete [interface number] [IP address]
Description: The defroute command allows the user, in the
syntax order shown above, to view, set, or
delete the default IP route to a managed device
through the specified interface.
Options: Not Applicable
Example:
-> bridge disable all
-> bridge enable 1
05141-68
-> bridge disable 1
-> defroute 2 147.152.42.32
05141-69