Filter
Top Products
Installing Optional Fast Ethernet Interface Modules
2E43-51/2E43-51R User’s Guide C-9
Figure C-4 Coverplate Removal
2. Remove the screw from the rear standoff. Save the screw.
3. See Figure C-5. Gently pull the faceplate of the 2E43-51 forward to
allow room for the Fast Ethernet Interface Modules to be aligned over
the connector.
!
CAUTION
When installing an FE-100FX or FE-100F3 module into the
2E43-51, remove the rubber plug on the module before
proceeding.
!
CAUTION
In the following step, take care when inserting the Fast Ethernet
Interface Module into the Motherboard Connector, so that the
pins do not bend. Otherwise, the Fast Ethernet Interface Board
and the Motherboard could be damaged.
2251-3
8
Front
Standoffs
Rear
Standoff
Coverplate
5
6