Cabletron Systems 9A100 Switch User Manual


 
SmartSwitch 9A100 User Guide 2-11
Switch Installation and Setup Using the Console
The above example creates an alias (traffic) that can be entered in place of the command set
SwitchTrafficCongestion
. For example:
SmartSwitch # traffic
Queue1EFCIThreshold(4096) :
Queue2EFCIThreshold(4096) :
Queue3EFCIThreshold(4096) :
Queue4EFCIThreshold(4096) :
LowEPDWatermark(10922) :
HighEPDWatermark(21845) :
RMCellMarkingEnable(1) :
EFCIMarkingEnable(1) :
SmartSwitch #
Enter the show alias command to display a list of all defined aliases and the command lines to which they correspond.
:SmartSwitch # show alias
AliasName(ALL) :
Alias List
==============================================================================
Index Alias Name : Aliased Command
1 PING : Start ping
2 xxx : show portconfig
3 traffic : set switchtrafficcongestion
SmartSwitch #
2.5.4 Ambiguous Commands
If you enter part of a command, and that part is not unique, the console displays a numbered list of possible matching
commands. For example, entering
show pnnin is ambiguous because there are several commands that start with
“pnnin.” In response, the SmartSwitch 9A100 displays a list of the possible commands:
SmartSwitch # show pnnin
< “pnnin” is ambiguous
Objects beginning with pnnin for action show
0 : PnniNeighbor
1 : PnniNetworkLink
2 : PnniNetworkNode
3 : PnniNode
4 : PnniNodeTimer
(#)Command (Q)uit? : 3
<
I meant PnniNode, so I enter number three (3) from the list
SmartSwitch # show PnniNode
Selecting number three from the list automatically enters the corresponding command; pressing enter executes the
command:
PNNI Node Information
================================================================================
Level : 80
Node Id : 50:a0:39:00:00:00:00:00:00:00:00:00:28:c1:80:00:20:d4:28:c1:80:00
Lowest : TRUE
Admin Status : UP
Oper Status : UP
Atm Address : 39:00:00:00:00:00:00:00:00:00:28:c1:80:00:20:d4:28:c1:80:00
Peer Group Id: 50:39:00:00:00:00:00:00:00:00:00:00:00:00
Rst Transit : FALSE
Rst Branching: FALSE
DB Overload : FALSE
Ptse : 2
SmartSwitch #