Filter
Top Products
4-26 SmartSwitch 9A100 User Guide
Upgrading and Changing Software Switch Administration
5. Set up the TFTP/Bootp server tables (or equivalent file) with:
- SmartSwitch 9A100 MAC address
- IP address of the SmartSwitch 9A100 Ethernet interface
- path to the image file on the TFTP/Bootp server
6. From the terminal connection, enter the reboot command.
7. When the following message appears,
“Press any key to exit to boot load prompt.”
stop the countdown by pressing any key. The boot load prompt (=>) appears on the terminal screen.
8. Enter the df B command. The SmartSwitch 9A100 contacts the TFTP/Bootp server and downloads
the file into the boot load image location that corresponds to the boot load image not currently
running. For example, if boot load image 0 is running,
df B downloads the file into boot load image
1, leaving boot load image 0 untouched.
=>df b
You've requested a Boot Load Software download
Are you sure?(Y/N)y
Initializing ethernet...
Starting Bootp...
Boot file: c:\tftpboot\images\boot.ima
Using TFTP to get bootfile "c:\tftpboot\boot\boot.ima" .
........................................................
.................................................
Validity checks of the Boot Load Software Downloaded file...
All Validity checks OK
Programming downloaded image into Boot Load Software1 area, please wait...
New Boot Load Software programmed successfully.
Modifying Control/Stat field to reflect new image change, please wait...
Control/Stat field programmed successfully.
Please reboot to execute new Boot Load Software
=>
9. If the new boot load software passes the validity checks, it is marked as the new default image. In
the example above, boot load image 1 becomes the new default image.
10. Reboot the SmartSwitch 9A100. The following message appears on the terminal screen:
Preparing to run Default Boot Load Software: 1
Enter 0 or 1 to override and force which Boot Load Software to run:
Default Boot Load Software1 Status Good
Boot Load Software1 Flash CRC checked OK
Copied Boot Load Software1 text into DRAM
Copied Boot Load Software1 data into DRAM
Default Boot Load Software Good
SmartSwitch Start-up Code Version 1.0.1, Sep 18 1997
Copyright 1997, Cabletron Systems Inc.
11. Notice that boot load image 1 (Boot Load Software1) is specified as the new default image.