Filter
Top Products
Chapter 4: Management
4-4 HSIM-W87 User’s Guide
4.2.1 Commands
The Network Tools function resides on the host platform and allows the
user to access and manage network devices. Figure 4-2 shows the
Network Tools Help screen. Screens may be slightly different depending
on the host platform and the version of firmware.
To access the Network Tools screen, access Local Management, then use
the arrow keys to navigate to and highlight the NETWORK TOOLS
menu item in the appropriate menu screen and press ENTER. The
Network Tools Help screen displays. Refer to the host platform manual
for details on accessing Local Management.
Figure 4-2 Network Tools Help Screen
TIP
Type help at the prompt to list all the commands that are
available for the device in the current operational mode. If help
is needed with a specific command, type help and the
<command>. Use lower case characters when entering
commands in Network Tools. Uppercase characters may be
specified for some of the options. A command used incorrectly
(wrong syntax or case) will prompt a display of the correct
usage.
-> help
090829
arp
netstat
show traceroute
defroute
ping
reset
bridge
SPECIAL:
done, quit, or exit - Exit from the Network Tools.
For help with a specific command, type 'help <command>'.
->
Commands Available to the User:
Built in Commands:
soft_reset
telnet
link_trap
imux
ds1alarm wanpq
dsx1 dsx3