Filter
Top Products
Chapter 4: Management
4-16 HSIM-W87 User’s Guide
Figure 4-5 Enabling the IMUX Application
This configuration is complete. More groups can be added as needed. The
commands dsx1 and/or ds1alarm can be used to verify the interface
numbers configured. Done, exit, or quit may be used after verification to
leave Network Tools.
imuxsetup3
->imux 1 -ea
# Inverse Multiplexer Application 1 enabled.
-> imux 1
# WAN Inverse Multiplexer 1 Status: Enabled
#
# Inverse WAN Available Xmit Byte Inverse
# Multiplexer Group Physical BW Count Multiplexer Channel
# ID Admin Status Number (bits/sec) (bytes) ID IfIndex Status
#-------------------------------------------------------------------------------------------------------------
# 1 Enabled 21 1536000 0 1 28 INACTIVE
# 1 Enabled 22 1536000 0 2 29 INACTIVE
# 1 Enabled 23 1536000 0 3 30 INACTIVE
# 1 Enabled 24 1536000 0 4 31 INACTIVE
#
#
# Number of WAN Inverse Multiplexer Groups currently programmed : 1
#
# Number of WAN Inverse Multiplexer Channels currently programmed : 4
->