Filter
Top Products
29
SSIM-H2-02 Fast Ethernet - Translational Switch SmartStack Interface Module Installation and User Guide Configuration
Status
Display only. Shows the current status of the port.
Table 4. Translational Switch Physical Port Status
Address Demand Aging Level
Sets the threshold on the number of entries in the address table on which entries are
aged faster. Possible values are
50
,
60
,
70
,
80,
and
90
percent and
Disabled
.
Default:
90 percent
Trace Mask
Sets a bit mask for which messages are logged in the message log. Used mainly by
Cabletron Systems support for debugging purposes.
Virtual Port Configuration
To configure a virtual port on a TS port, select
Virtual Port Configuration
on the
Port Configuration
menu of the TS port. If the TS port has more than one virtual
port, a list of the corresponding CRFs appears from which the virtual port must be
selected. The following menu options are available:
Enabled
Sets the administrative state of the virtual port to
Yes
or
No.
Default:
Yes
Value Mean ing
Down
The port is down.
Going Up
The port is enabled a protocol connection is being auto-
negotiated.
Up
The port is up.