Filter
Top Products
36
SSIM-H2-02 Fast Ethernet - Translational Switch SmartStack Interface Module Installation and User Guide Configuration
Source Routing
Enables or disables Source Routing in Novell frames transmitted to Token Ring.
Default:
noSR
Explorer Frames Type
Sets the type of explorer for IPX traffic.
Default:
STE
IPX Address Translation
Enables and disables reversing MAC address bits in Novell frames.
Possible values are
do not bit reverse
and
bit reversed
.
Default:
do not bit reverse
NetBios Conversion Status
Display only. Shows the current status of the NetBios Conversion.
Possible values are
Enabled
and
Disabled
.
NetBios Conversion Parameters Change
To change NetBios conversion parameters select
NetBios conversion parameters
change
on the
Frame Conversion Configuration
menu of the TS port.
NetBios Frames Conversion
Determines how NetBios frames are converted. Possible values are
Enabled
and
Valu e Meaning
SR
Source Routing information will be added to frames
converted from Ethernet to Token Ring format.
noSR
Frame will be transmitted to Token Ring as a transparent
frame.
Table 14. NOVELL: Source Routing
Value Meanin g
ARE
Use All Routes Explorer.
STE
Use Spanning Tree Explorer.
Table 15. Novell: Explorer Frames Type