Filter
Top Products
34
SSIM-H2-02 Fast Ethernet - Translational Switch SmartStack Interface Module Installation and User Guide Configuration
Explorer Frames Type
Sets the type of explorer that should be used for
ARP/RARP
traffic. From the set
of IP protocols explorer frame type can be chosen only for ARP/RARP frames.
Other IP protocols can generate only STE explorer.
Default:
STE
(change to ARE for typical Token Ring behavior for ARP frames)
Enable IP Fragmentation
Enables or disables fragmentation of IP frames received from Token Ring and
transmitted to Ethernet. The possible values are
Enabled
and
Disabled
.
Default:
Enabled
TR MAC Address for IP Multicasts
Allows entering the IP multicast address. The address is entered in the MAC
address format.
Default:
C00000:040000
Novell Conversion Status
Display only. Shows the current status of the Novell Conversion.
Possible values are
Enabled
and
Disabled
.
Value Meanin g
ARE
The All Routes Explorer should be used.
STE
Spanning Tree Explorer should be used.
Table 10. IP: Explorer Frames Type
Value Meanin g
ARE
Use All Routes Explorer.
STE
Use Spanning Tree Explorer.
Table 11. IP: Explorer Frames Type