Cabletron Systems SSIM-H2-02 Switch User Manual


 
30
SSIM-H2-02 Fast Ethernet - Translational Switch SmartStack Interface Module Installation and User Guide Configuration
Status
Display only. Shows the current status of the virtual port.
MTU
You can use only one value as MTU.
Default:
1500
Max Broadcast Rate (frames/sec)
Sets the maximum broadcast frame rate; possible values are
0
to
5000
frames/sec
or
Disabled
. If enabled, this will limit the amount of broadcast frames being
forwarded from the TS side of the virtual port to the switch.
Default:
Disabled
Value Meanin g
Admin down
The port or virtual port is disabled.
Waiting for port up
The virtual port is waiting for the port to
come up.
Up
The virtual port is up but not
forwarding.
Forwarding
The virtual port is up and forwarding.
Temporary down
The virtual port is currently down,
because the port is temporarily down.
Table 5. Translational Switch Virtual Port Status
MTU configured Actual TS frame size LF bits
1500
1558 001
Table 6. Translational Switch Configured and Actual Frame SIze