Filter
Top Products
20
USB
7
C
9
8
Windows
Windows XP/2000
When the Network Setup of the Card Slot dialog box appears, specify
the drive letter, then click Next.
If the error message appears, refer to "5 The following screen is displayed
during setup" in the printed manual: Network Setup Troubleshooting.
•
When the Setup Completion dialog box appears, remove the USB
cable, then click Finish.
Next, read "12 Information" on page 29!
To change the port name, click View Setup Results, then click Set Port
Name. For details, refer to "8 Changing the port name" in the printed
manual: Network Setup Troubleshooting.
If Unsafe Removal of Device is displayed, click OK.
•
•