Filter
Top Products
6
Installing the Ink Tanks
• For safety reasons, store ink tanks out of the reach of small children.
• Do not drop or shake ink tanks as this may cause the ink to leak out and stain your clothes and hands.
• Be sure to remove the clear film from the ink tank in the exact order as shown in step 2.
1
When using iP4000, unpack the cyan
ink tank.
When using iP3000, unpack the yellow
ink tank.
2
Pull the orange tape off in the direction
of the arrow and remove the clear film.
3
Hold the ink tank as shown in the
diagram and remove the orange
protective cap.
4
Insert the cyan ink tank (for iP4000) or
yellow ink tank (for iP3000) into the
right-hand slot. Press the mark on
the ink tank until it clicks into place.
• Do not squeeze the side of
ink tanks as this may cause
the ink to leak out and stain
your clothes and hands.
• Do not touch the open ink
port.
• Do not reattach the protective
cap once you have removed
it.
protective cap
ink port