Filter
Top Products
38
Getting Ready Printing AppendicesOverview
Troubleshooting Tasks and Index
NextBack
Return to Cover Page
2 Attach the battery pack terminal cover onto the battery.
3 Attach the battery cover onto the printer.
Push the battery cover in the direction indicated by the arrow until
it clicks into place.
The printer indicator will begin to blink orange when the battery charge
is low. In addition, a message may appear on a connected camera’s LCD
monitor or the printer’s LCD monitor. Recharge the battery or exchange
it for a fully charged one.
To protect the battery and prevent a decline in performance, do not charge
it continuously for more than 24 hours.
• This is a lithium ion battery pack so there is no need to completely use
or discharge it before recharging.
• It can be charged at any charge state.
• You are advised to charge the battery on the day of use, or one day
before, to ensure a full charge.
• Even charged battery packs continue to discharge naturally.
• The battery life should be considered over when the usable time is
severely limited even after the prescribed charging time.
• Replace it with a new battery.
Battery Storage
• After you finish using the battery, attach the battery pack terminal
cover and store it at a cool temperature (0°-30°C/32°-86°F).
Storing the battery fully charged for long periods of time (about 1 year)
shortens the battery life and causes its performance to decline. When you do
not use it for long period of time, fully charge it once a year and store after
fully discharging it in the printer.
Remaining Battery Charge
Battery Handling