Filter
Top Products
1-6
This section describes keys used when making copies and setting the Additional Functions.
Enlarge /
Reduce
Exposure
Image Quality
Memory Alarm
Energy Saver
Stop/Reset
Start
Additional
Functions
Collate/
2on1
Status
Monitor
Enlarge/Reduce key
Sets an enlargement or reduction ratio of the copy.
Set key
Determines the contents you set or
register. Also, if the document being
scanned stops in the ADF, pressing
this key makes the document come
out automatically.
Memory/Alarm indicator
Lights green during copying or when the
copy job is stored in memory and flashes
red when the machine has a problem
such as a paper jam. (The error message
is displayed in the LCD.)
Exposure key
Adjusts the copy exposure.
Image Quality
key
Adjusts the quality of copy image.
Numeric
keys
Enter copy quantity and other
numerical values.
Stop/Reset
key
Cancels copying and other
operations, and returns the
machine to standby mode.
Also, this key is used to confirm
the copy job you reserved.
Energy Saver
key
Sets or cancels the energy saver
mode manually. The key lights green
when the energy saver mode is set,
and goes off when the mode is canceled.
Start
key
Starts copying.
Additional Functions key
Customizes the way your machine operates.
4 (–) , e (+)
keys
Scroll through the selections so you can see other settings.
Collate/2 on 1 key
Sorts copies in order of pages or reduces 2
letter-size documents to fit on a
single letter-size sheet.
Status Monitor key
Checks the status of print,
copy and report jobs.
Operation Panel