Filter
Top Products
Turning the Machine On and Off
Turn on the machine before printing.
Turning on the Machine
Before turning on the machine, confirm the following.
• The FINE Cartridges are installed properly.
If you are using the machine connected to a computer, confirm also the following.
• The machine is connected to your computer (or a compatible device).
• The MP Drivers are installed.
Note
If preparatory operations above are not complete, follow your setup sheet to complete them.
Open the Operation Panel and press
the ON/OFF button to turn on the
machine.
The Power lamp flashes and then
remains lit green.
2
1
_, Important
If the Alarm lamp begins to flash orange and
an error message is displayed on the LCD,
see "An Error Message Is Displayed on the
LCD" on page 57.
If you are using the machine
connected to a computer, turn on your computer.
Turning off the Machine
To turn off the machine, press the
ON/OFF button.
When the Power lamp stops flashing, the
machine is turned off.
_, Important
About the Power Plug
When removing the power plug after turing
off the machine, be sure to confirm that the
Power lamp is not lit. If the power plug is
removed from the wall outlet with the Power
lamp still lit or flashing green, the machine
may become unable to print.
See "Keeping the Best Printing Results" on
page 51.
8 Before Using the Machine