Filter
Top Products
18 Before Using the Machine
2 Load the envelopes.
(1) Load the envelope against the right
side of the Rear Tray.
Load with the address side facing
UP and the rear flaps DOWN on
the left.
Up to 10 envelopes can be loaded
at once.
(2) Pinch the Paper Guide and slide it
against the left side of the
envelope.
(3) Set the Paper Thickness Lever to
the right.
3 Specify the settings in the printer driver.
(1) Select Envelope in Media Type.
(2) Select the size for envelopes.
In Windows
®
, select DL Env. or Comm. Env. #10 in Page Size.
In Macintosh, select DL Envelope or #10 Envelope in Paper Size.
(3) Select Landscape in Orientation.
Note
Reset the Paper Thickness Lever to the
left when you finish printing. For details on
the Paper Thickness Lever, refer to
“Inside” in “Main Components” of the
User’s Guide on-screen manual.
Important
Be sure to set the printer driver setting properly. If you do not, the address will be printed in the
wrong direction.
Note
For details on printer driver settings, see “Printing with Windows” on page 29 or “Printing with
Macintosh” on page 30.
(1)
(B)
(3)
(A)
(2)
(A) Printing orientation
(B) Make sure the flaps are folded.