Canon MP700 All in One Printer User Manual


 
Chapter 3 Print media handling 3-9
3
Print media handling
Loading banner paper
NOTE
Always leave an extra sheet at the end of the banner—just in case the type runs over.
Printing on banner paper may require considerable amounts of ink, so use new ink tanks if necessary.
For best print results on banner paper, use light design patterns.
Follow this procedure to load banner paper in the multi-purpose tray:
1 Make sure the paper thickness lever is set to
the right.
For details, see p. 3-5.
2 Remove the tray cover and multi-purpose
tray, and place the machine near the edge
of a table so that the paper can flow over the
edge as it exits the machine.
3 Cut the banner paper to the required length
and place it behind the machine on a flat
surface. Then insert the first sheet and press
gently down on the sheet q. Pinch and
adjust the paper guide to the width of the
paper w.
Press down gently on the sheet until paper
feeding starts.
Make sure the sheets behind the machine are
aligned with the first sheet.
4 Set your computer to print on banner
paper.
Allow the paper to flow over the edge of the table
as it exits the machine.
w
q