Filter
Top Products
Chapter 13 Machine settings 13-4
13
Machine settings
3. ACTIVITY REPORT Enables/disables automatic printing of an ACTIVITY
REPORT after every 20 transactions.
AUTO PRINT ON
AUTO PRINT OFF
p. 10-2
3. TX SETTINGS — —
1. ECM TX* Enables/disables Error Correction Mode (ECM) during
sending.
ON
OFF
2. MID PAUSE SET Selects the pause length when you press [Redial/Pause]. 2 SEC (1 to 15)
3. AUTO REDIAL Enables/disables automatic redialing. ON
OFF
p. 8-5
1. REDIAL TIMES If you select <ON>, selects the number of redialings. 2 TIMES
(1 to 10)
2. REDIAL
INTERVAL
If you select <ON>, selects the length of time between
redialings.
2 MIN. (2 to 99)
4. TIME OUT Enables/disables automatic scanning without having to
press [Start] after using speed dialing or redialing to
send a document.
ON
OFF
5. TX START SPEED Selects the speed at which the machine starts
transmitting.
33600bps
14400bps
9600bps
7200bps
4800bps
2400bps
6. COLOR DIRECT TX Enables/disables sending of color documents to fax
machines that do not have color faxing capability.
OFF
ON
4. RX SETTINGS — —
1. ECM RX* Enables/disables Error Correction Mode (ECM) during
reception.
ON
OFF
2. FAX/TEL AUTO SW If you select <FAX/TEL AUTO SW> as the receive mode,
customizes its settings.
— p. 9-2
1. RING START TIME Selects the time the machine takes to check whether a
call is a fax or voice call.
8 SEC (0 to 30)
2. F/T RING TIME Selects the ring length for voice calls. 15 SEC
(10 to 45)
3. DEFAULT
ACTION
Selects whether the machine switches to receive mode
after the ring time has elapsed, or whether it
disconnects the call.
RECEIVE
DISCONNECT
3. DRPD:SELECT FAX If you select <DRPD> as the receive mode, select the
ring pattern for the machine.
DOUBLE RING
SHORT-SHORT-LONG
SHORT-LONG-SHORT
OTHER RING TYPE
NORMAL RING
p. 9-4
Name Description Setting Details
* ECM stands for Error Correction Mode. Resends image data that was lost due to phone line interference so thereby making
sent and received images seamless.