Canon MP700 All in One Printer User Manual


 
9-2 Receiving faxes Chapter 9
Receiving both faxes and voice calls
automatically: FAX/TEL AUTO SW
Choose this mode if:
you only have one telephone line for both fax and telephone use.
you want to receive faxes automatically as well as voice calls.
You will need to:
set <FAX/TEL AUTO SW> ( p. 9-1).
connect a telephone to your machine ( Set-Up Sheet).
When you receive a fax call: The machine will receive the fax automatically.
When you receive a voice call: The machine will ring. Pick up the handset to answer the call.
* A phone connected to your machine will not ring.
Customizing FAX/TEL AUTO SW
You can customize this mode to control precisely how your machine handles incoming calls.
You can adjust the time the machine takes to check whether a call is a fax or voice call, the
length of time the machine rings when it is a voice call, and the action the machine must take if
no one answers a voice call.
Follow this procedure to customize <FAX/TEL AUTO SW>:
1 Press [Menu].
2 Use [22
22
] or [33
33
] to select <USER DATA>.
3 Press [Set].
4 Use [22
22
] or [33
33
] to select <FAX SETTINGS>.
5 Press [Set].
6 Use [22
22
] or [33
33
] to select <RX SETTINGS>.
7 Press [Set].
8 Use [22
22
] or [33
33
] to select <FAX/TEL AUTO SW>.
9 Press [Set] twice.
10 Use [22
22
] or [33
33
] to select the time the machine takes to check whether a call is a fax or
voice call.
USER DATA
1.TEL REGISTRATION
FAX SETTINGS
1.USER SETTINGS
RX SETTINGS
1.ECM RX
RING START TIME
8SEC