Filter
Top Products
Preface
IX
Handling
IMPORTANT
• If dust accumulates around the plug of the power cord
when it is connected to a power outlet, unplug the
machine and wipe the plug with a clean, dry cloth.
• Do not plug the machine into the same circuit as
appliances such as an air conditioner, television, or copier.
These devices generate electrical noise which may
interfere with your machine’s operation.
• Whenever you turn off the power and unplug the machine,
wait at least five seconds before you plug it in again.
• Use only the power cord that came with the machine.
• Turn off the power and unplug the machine in the following conditions:
–When the power cord or plug is damaged or frayed.
–If liquid has spilled into the machine.
–If the machine has been exposed to rain or water.
–If the machine does not operate normally when you have followed the instructions in the guides
included with your machine. Adjust only those controls that are covered by the instructions in the
guides since improper adjustment of other controls may result in damage and will often require
extensive work by a qualified technician to restore the product to normal operation.
–If the machine has been dropped or damaged.
–If the machine exhibits a distinct change in performance, indicating a need for servicing.
WARNING
• Do not drop paper clips, staples, or other metal objects
inside the machine. Also do not spill water, liquid, or
flammable substances inside the machine. If these items
come into contact with high-voltage parts inside the
machine, it may result in fire or electrical shock. If these
items are dropped or spilled in the machine, turn off the
power and unplug the power cord immediately with dry
hands. Then contact the Canon Customer Care Center.
• Do not use any highly flammable sprays near the
machine. If gas from a spray comes into contact with the
electrical components inside the machine, it will result
in fire.
• There are high-voltage components inside the machine.
If you are looking inside the machine to remove paper
jams etc., do not allow metallic objects such as jewelry
to come into contact with the inside of the machine.
Contact may result in burns or electrical shock.
Fax Model