Filter
Top Products
107
SETTING UP FUNCTIONS FROM MENUS
Setting Various Function
Setting Auto Setup Function
[Auto setup]
You can select an item you want to enable in the
auto setup function.
T
T
Select [On] or [Off] for the following items if you
want to enable or disable them in the auto setup
function, respectively.
Selecting the Power Management Mode
[Power management mode]
You can turn off the lamp or projector automati-
cally for saving power.
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
System settings
Auto setup
Enables/disables the auto focusing.
Enables/disables the auto keystone
correction.
Enables/disables the auto input
selection.
Enables/disables the auto screen
color correction.
z A confirmation screen appears during
the auto setup so that you can check
which functions are enabled/disabled
(P44, 68).
z You can manually adjust each item.
[Auto focus]: [FOCUS] button (P49)
[Auto keystone]: [KEYSTONE] button
(P50)
[Auto input]: [INPUT] button (P46, 68)
[Auto screen color]: Menu function
(P96)
z If you select [16:9 D. image shift] for
[Screen aspect], you cannot change
the setting of each item. The auto
setup function will also be disabled.
DIGITAL PC ANALOG PC
DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO
Auto focus
Auto keystone
Auto input
Auto screen color
System settings
Power management mode
Disables the power management
mode.
Enters the power management
mode. The projector restarts projec-
tion when a signal is inputted or any
operation button is pressed.
Enters the exit mode and turns off
the projector automatically.
z You cannot enable the [Direct Power
on] function if you select [Off].
z The [POWER] indicator flashes red
and green during the power manage-
ment mode.
DIGITAL PC ANALOG PC
DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO
Off
Standby
Exit