Filter
Top Products
70
PROJECTING AN IMAGE FROM AV EQUIPMENT
Selecting SCART
1 Press the [INPUT] button.
The [INPUT] window appears.
2 Select the second top item in the menu with the [INPUT] button.
The selection is toggled through available input signals from above.
3 If the SCART is unavailable from the list at the left, press [>], and then press [ ] / [ ] to
select the SCART from the list at the right.
4 Press the [OK] button.
z Select [SCART] for Input Terminal-2.
z You can select any input signal type from all options through the [ ] / [ ] button.
<
<
<
<