Filter
Top Products
51
PROJECTING AN IMAGE FROM THE COMPUTER
3 Press the [OK] button.
z The result of keystone adjustment is memorized. If you place the projector at the same posi-
tion, the keystone adjustment is not necessary.
z When the Keystone adjustment is selected, signals are processed digitally. The image may
look different from the original one.
z The aspect ratio of the image may change after the keystone adjustment.
z Keystone can be adjusted vertically and horizontally within the range of +/-20 degrees. The
amount of adjustment may be less than +/-20 degrees depending on the combination of the
amount of optical zooming, input signal type, and adjustment direction (vertical or horizon-
tal).
z If the keystone distortion is too large to adjust, move the projector installation position.
z To reset the keystone adjustment to 0, press the [KEYSTONE] button again to display the
[Keystone reset] window. On the window, select [OK] with the [<] button, and then press the
[OK] button.
z If you select [16:9 D. image shift] for [Screen aspect], the keystone adjustment will be dis-
abled. Project the image at right angle to the screen.