Filter
Top Products
39
PROJECTING AN IMAGE FROM THE COMPUTER
The countdown window is displayed for approximately 20 seconds, and then the guid-
ing message for the auto setup function appears.
Adjust the focus by performing the auto setup or the focus adjustment if you cannot
read the message due to out of focus. (P44, 49)
The LED illumination lamp blinks blue until the projection is started.
To project an image immediately, press the [OK] button.
z Enter a password if the Password input screen appears (P112, 113).
z You can turn on the projector by connecting the power cord without pressing the [POWER]
button (direct power on) (P108).
z You can display a specified Logo on the countdown screen (P98).
z You can specify whether to enable or disable the LED illumination lamp (P111).
z You can skip the countdown window (P98).
Selecting a Language
A window appears when the projector is turned on for the first time. You can select a
language to be used by the projector for displaying menus and so on in the window.
Select your language as shown below.
Select a language with the POINTER buttons and press the [OK] button.
z Adjust the focus by performing the focus adjustment if it is out of focus (P49).
z You can change the language from the menu at a later time (P109).
An item highlighted in orange will be selected.