Filter
Top Products
Menu Description
112
Network standby settings
> [Network settings] > [Network standby settings]
Specify the operating status of wired network functions in standby mode.
Network (wired/wireless)
> [Network settings] > [Network (wired/wireless)]
Enable or disable wired or wireless network connectivity and the mode of operation.
Specifying [Off] can save energy.
Submenu Function
Normal
All network functions are available even in standby mode,
including the web screen, control over the network, and PJLink.
Low-power
All network functions are available even in standby mode.
However, the projector may be less responsive than usual when
some functions are initially used.
• [Low-power] may delay access over the network for some functions. For faster access,
select [Normal].
• Power consumption when Network function (wired) is [On] varies depending on
whether Network standby settings is set to Normal or Low-power.
Submenu Function
Off/Off Disables the network function.
On/Off Enable only wired networking.
On/On (Pj AP) Enable both wired and wireless (PJ AP mode) networking.
Off/On (Pj AP) Enable only wireless (PJ AP mode) networking.
Off/On (Infra) Enable only wireless (infrastructure mode) networking.
Notes When Connected Wirelessly
• The [Network (wired/wireless)] setting cannot be changed when the projector is set to
[Master] or [Slave] in PC-free multi projection mode.
• A message is displayed at the initial startup in PJ AP mode (P105) requesting that you
check security key settings.