Filter
Top Products
Projection Procedure
53
Basic Guide Projection Procedure
Focusing, Resizing, or Moving the Image
■ Adjusting Image Focus
To adjust the focus, turn the focus ring.
■ Adjusting Image Size
To adjust the image size, turn the lever on the
projection lens. Change the projector installation
position (P38) if your desired image is too large or
too small to adjust it with the zoom function.
■ Adjusting the Image Position
Turn the lens shift dials to adjust the projected image
vertically or horizontally. Called “lens shift,” this adjusts
the projected image into position by moving the lens
up, down, left, or right.
Manual adjustment using the lens shift
dials moves the image as follows.
For details on lens shift, refer to “Lens Shift
Function” (P41).
• Instead of adjusting where the image is projected, you
can also move the image itself. For details, refer to
“Digital image shift” (P85).
• You can fine-tune the image position by turning the
upper part of the upper lens shift dial or the lower part
of the lower lens shift dial.
Focus ring
Focus
adjustment
1
1
2
2
3
3
4
4