Filter
Top Products
Menu Description
72
PC-free multi projection
> [Input settings] > [PC-free multi projection]
Specify settings when projecting images on a USB flash drive to multiple networked
projectors. For instructions, see “Using PC-Free Multi Projection” (P147).
Mode setting
Specify the mode for PC-free multi projection: Master
*1
or Slave
*2
mode.
*1
Connect a USB flash drive and stream images for projection to Slave
projectors.
*2
Project images streamed from the Master projector.
Option Function
Off Disable PC-free multi projection.
Master Projection in Master mode.
Slave Projection in Slave mode.
Layout pattern setting
Specify the total number of projectors and the layout pattern (P148).
Option Function
Total number
Specify the total number of projectors, including all Master and Slave
projectors. 2 - 9 projectors can be specified.
Layout pattern
Select a layout pattern. Images from the Master projector are streamed
to the upper left in the layout pattern.
Destination projector setting
Specify IP addresses of projectors set to Slave mode.
Option Function
IP address
Enter the IP address of destination projectors. The projector in Master
mode is identified as [1]. The wired IP address specified in [Network
settings] is displayed.
Confirm
Stream projection to the Slave projector with the corresponding number
(2 - 9), as specified in the IP address field.
Enter Confirm the IP address of destination projectors.
Before specifying the mode, confirm that you are using a wired network connection
and that [Network (wired/wireless)] is set to [On/Off] or [On/On (Pj AP)] (P112).