Filter
Top Products
Chassis Mounting
9/24/01 4-3
In addition, you will need one or more of the following items:
• A standard 25-pair telephone cable with “D” style 50-pin male connector to connect the
Access Bank II - SNMP to your punch-down block or RJ-11 “Harmonica.”
• If you are wall-mounting the Power Converter Cube, you will need four fasteners appro-
priate for mounting a seven-pound object.
4.3 Chassis Mounting
The Access Bank II - SNMP can be wall-mounted, rack-mounted, or surface-mounted. Prior to
mounting the Access Bank II - SNMP chassis, ensure that the installation site meets the following cri-
teria:
• Adequate clearance for access to control panel DIP switches, cable routing, and ventila-
tion. Leave at least 18 inches behind the back plate for maintenance and accessing the
slide-in voice cards.
• Because the cables on the power conversion cube total 13 feet in length, there should be
a properly grounded, 110 VAC power outlet within 10 feet of the Access Bank II - SNMP
Control Panel.
• A stable environment, clean and free from extremes of temperature, shock, vibration and
EMI, with a relative humidity between 0 and 95%.
• An ambient temperature that stays below 40
º
C (104
º F
).
Dual RS-232 data and magagement cable (10 ft) for connection to a
router, computer, statistical multiplexer, SNA cluster controller, or
SCADA equipment. This cable supports both synchronous operation
at 56 or 64 Kbps, and asynchronous operation at 9.6, 19.2, 28.8, 38.4,
and 57.6 Kbps.
005-0001 - DCE - MFF -
10’ - 10’
V.35 data cable - 10 ft 005-0008-DCE-MM-10’
V.35 data cable - 25 ft 005-0009-DCE-MM-25’
V.35 data cable - 50 ft 005-0010-DCE-MM-50’
19” heavy duty rack mounting brackets (2) with sixteen (16) 6-32 x 3/
8” phillips pan-head screws
004-0041
23” heavy duty rack mounting brackets (2) with sixteen (16) 6-32 x 3/
8” phillips pan-head screws
004-0113
220Vac/50Hz to -48Vdc Power Conversion Cube for international
applications with custom wall plug adapter
AB-220Power