Filter
Top Products
Installation Section 2
WR850 2-5
10 Using a screwdriver, turn each screw until part of it protrudes from the wall, as shown:
– There must be 4.0 mm (.16 inches) between the wall and the underside of the screw
head.
– The maximum distance from the wall to the top of the screw head is 7.6 mm (.3 in).
4.0 mm
10.5 mm (.4 inches)
maximum
7.6 mm (.3 inches)
maximum
11 Remove the two plastic feet, nearest to the LED panel, from the bottom of the router to
uncover the keyholes.
12 Place the router so the keyholes are above the mounting screws.
13 Slide the router down until it stops against the top of the keyhole opening.
14 Follow the installation procedures for connecting and configuring the router.