Celestron WR850G Network Router User Manual


 
Configuration Section 3
WR850 3-39
Configuring Time Settings
The Time screen enables you to configure time settings.
To access the screen, click Control Panel > Time.
Field Description
Current Time
Displays the current time.
Time Zone
Select your local time zone. The default is EST.
Auto Daylight
Adjust
If you want to automatically adjust for Daylight Savings Time, check to
enable this feature. The default is enabled.
NTP Time
Synchronization
If you want to automatically check the current time, check to enable
this feature. The default is enabled.
NTP Server
1, 2, 3
Enter the current Network Time Protocol (NTP) servers from which
you can choose to synchronize your device. A listing of public NTP
servers, their access policies, and their Service Areas can be found
through the following URL: http://www.ntp.org
.
To change, enter the host name or IP address for a desired Time
Server.
Apply
Click to save your settings.
Cancel
Click to cancel any changes.