Filter
Top Products
17-48
Cisco ONS 15600 Procedure Guide, R8.0
Chapter 17 DLPs E100 to E199
DLP- E159 Manually Lock or Unlock a User on Multiple Nodes
Step 6 Click OK.
Step 7 Return to your originating procedure (NTP).
DLP-E159 Manually Lock or Unlock a User on Multiple Nodes
Step 1 From the View menu, chose Go To Network View.
Step 2 Click the Provisioning > Security > Users tabs.
Step 3 Click the user you want to lock out.
Step 4 Click Change.
Step 5 Complete one of the following:
• To lock a user out so the user cannot log into nodes on the network, check the Locked out check box.
• If the user is currently locked out, uncheck the Locked out check box.
See the “DLP-E130 Change Security Policy on a Single Node” task on page 17-26 for more
information about manual lockouts and lockout duration.
Step 6 Click OK. A confirmation dialog box appears.
Step 7 Click OK. Confirm that the changes appear; if not, repeat the task.
Step 8 Return to your originating procedure (NTP).
Purpose This task manually locks out or unlocks a user from multiple nodes.
Tools/Equipment None
Prerequisite Procedures DLP-E26 Log into CTC, page 16-33
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Superuser