Filter
Top Products
IP Configuration
IPv4 Management and Interfaces
Cisco Small Business 200 Series Smart Switch Administration Guide 226
16
To configure the IPv4 device IP address:
STEP 1 Click Administration > Management Interface > IPv4 Interface.
STEP 2 Enter values for the following fields:
• Management VLAN—Select the Management VLAN used to access the
device through telnet or the Web GUI. VLAN1 is the default Management
VLAN.
• IP Address Type—Select one of the following options:
-
Dynamic
—Discover the IP address using DHCP from the management
VLAN.
-
Static
—Manually define a static IP address.
NOTE DHCP Option 12 (Host Name option) is supported when the device is
an DHCP client. If DHCP Option 12 is received from a DHCP server, it is saved
as the server’s host name. DHCP option 12 will not be requested by the
device. The DHCP server must be configured to send option 12 regardless
of what is requested in order to make use of this feature.
If a static IP address is used, configure the following fields.
• IP Address—Enter the IP address, and configure one of the following Mask
fields:
- Network Mask—Select and enter the IP address mask.
- Prefix Length—Select and enter the length of the IPv4 address prefix.
• Administrative Default Gateway—Select User Defined and enter the
default gateway IP address, or select None to remove the selected default
gateway IP address from the interface.
• Operational Default Gateway—Displays the current default gateway
status.
NOTE If the device is not configured with a default gateway, it cannot
communicate with other devices that are not in the same IP subnet.