Filter
Top Products
4011533 Rev A 15
DPR2325 and EPR2325 Front Panel Description
DPR2325 and EPR2325 Front Panel Description
The front panel of your cable modem gateway provides LED status indicators that
indicate how well and at what state your cable modem gateway is operating. See
DPR2325 and EPR2325 Front Panel Status Indicator Functions (on page 116), for
more information on front panel LED status indicator functions.
1 POWER—Illuminates solid green to indicate that power
is being applied to the cable modem gateway
2 RECEIVE DATA—Blinks to indicate that the cable
modem gateway is receiving data from the cable
network
3 SEND DATA—Blinks to indicate that the cable modem
gateway is sending data to the cable network
4 CABLE—Illuminates solid green when the cable
modem gateway is registered on the network and fully
operational. This indicator blinks to indicate one of the
following conditions:
- The cable modem gateway is booting up and not
ready for data
- The cable modem gateway is scanning the network
and attempting to register
- The cable modem gateway has lost registration on
the network and will continue blinking until it
registers again
5 Ethernet (1-4)—Illuminates solid green to indicate that
an Ethernet carrier is present and blinks to indicate that
Ethernet data is being transferred between the PC and
the cable modem gateway
6 USB—Illuminates solid green to indicate that a USB
carrier is present and blinks to indicate that data is being
transferred on a USB connection to the cable modem
gateway
7 PC Wireless—Illuminates solid green to indicate that a
wireless access point is enabled and blinks to indicate
that wireless data is being transferred over the wireless
connection
Note: After the cable modem gateway is successfully
registered on the network, the POWER (LED 1) and CABLE
(LED 4) indicators illuminate continuously to indicate that
the cable modem gateway is online and fully operational.