Filter
Top Products
4011533 Rev A 59
How Do I Configure the Cable Modem Gatewa
y
?
Field Name Description
Static IP
Mask
Manual entry is required. Your ISP will provide the
information for you to enter into this field.
Default
Gateway
Manual entry is required, your ISP will provide the
information for you to enter into this field.
Primary DNS
(static IP
only)
Manual entry is required. Your ISP will provide the
information for you to enter into this field.
Secondary
DNS
(static IP
only)
Manual entry is required. Your ISP will provide the
information for you to enter into this field.
Function Keys
The following function keys appear on the Setup Basic Settings - Network
Configuration page.
Key Description
Renew WAN
IP Address
Lease
Forces a release and renewal of your WAN IP address
Apply Saves the values you enter into the fields without closing the
screen
Configuring and Managing IP Addresses
Use the Setup Basic Settings - IP Management page to configure how your system
manages and assigns IP addresses in your network.
Note: If you are not familiar with the IP management procedures detailed in this
section, contact your service provider before you attempt to change any of the cable
modem gateway default IP management settings.
Click LAN IP Address Management in the Basic Settings section of the Setup page
to access the Setup Basic Settings - IP Management page.