Filter
Top Products
4011533 Rev A 53
How Do I Configure the Cable Modem Gatewa
y
?
To set up your password
To set up your password, type your password in the Password field, and then
re-type your password in the Re-Enter Password field. Then, click Apply to save
your password.
Note: If you set a password, on subsequent access to the WebWizard pages, a screen
similar to the following appears. Do not forget your password. Write your password
and store it in a secure location known only to you.
Configuring Network Time Synchronization
Use the Basic Settings Enable/Disable time synchronization by Network Time
protocol page to enable or disable time synchronization by Network Time protocol.
Note: If you are not familiar with the time configuration procedures detailed in this
section, contact your service provider before you attempt to change any of the cable
modem gateway default time synchronization configuration settings.
Click Set Time in the Basic Settings section of the Setup page to access the Basic
Settings Enable/Disable time synchronization by Network Time protocol page.