Filter
Top Products
4011533 Rev A 55
How Do I Configure the Cable Modem Gatewa
y
?
Setup Basic Settings - Enable/Disable Time Synchronization by
Network Time Protocol Page Description
The following table provides a description of the fields within the Basic Settings
Enable/Disable time synchronization by Network Time protocol page.
Field Name Description
Current System Time Displays the current system time and date
Network Time Protocol Allows you to enable or disable network time
protocol
Note: The cable modem gateway will
automatically use the time server in your
broadband network. Should there be no current
time displayed or if the network time is incorrect,
enable Network Time Protocol to use a public
Internet time server to set the clock in the gateway.
Latest Update Success Displays the time and date of the last successful
time update
Time Zone Displays the current time zone. The drop-down
list allows you to select your local time zone.
Daylight Saving Time Allows you to adjust the time during periods
when Daylight Saving Time is in effect. Check the
Enable box to enable or disable this setting.
Note: If the offset for Daylight Savings Time is
other than 60 minutes, enter the offset in the
minutes field.
Time Server Add and delete time server URLs or IP addresses
to and from the list, as required. When using
Network Time Protocol, multiple time servers can
be specified for the gateway to query for time of
day. The gateway will sequentially step through
the listed time servers until it acquires the current
time. There are three well known public time
servers entered as default servers.
Function Keys
Key Description
Apply Saves all additions, edits, and changes
Add Server Allows you to add a network time server
Remove Server Allows you to remove a network time server