Filter
Top Products
66 4011533 Rev A
How Do I Configure the Cable Modem Gateway?
Enabling and Disabling Advanced Features
Use the Setup Advanced Settings - Options page to enable or disable advanced
features on your network. When the wireless interface is disabled, the transmitter is
turned off.
Note: If you are not familiar with the advanced settings detailed in this section,
contact your service provider before you attempt to change any of the cable modem
gateway default advanced options settings.
Click Options in the Advanced Settings section of the Setup page to access the Setup
Advanced Settings - Options page.
Setup Advanced Settings - Options Page Example
The following illustration is an example of the Setup Advanced Settings - Options
page.
Setup Advanced Settings - Options Page Description
The following table provides a description of the fields within the Setup Advanced
Settings - Options page.
Note: If you make changes in the Setup Advanced Settings - Options page, click
Apply to apply and save your new IP address filter settings.