Filter
Top Products
2 Configuration Notes for Cisco Media Convergence Server 7830
Introduction
Introduction
Cisco CallManager on the Cisco Media Convergence Server 7830 is a network business
communications system providing high-quality telephony over IP networks. Cisco CallManager and
the MCS-7830 enable the conversion of conventional, proprietary circuit-switched
telecommunication systems to multi-service, open LAN systems.
System Specifications
This section lists the system specifications for Cisco CallManager and the Cisco Media
Convergence Server 7830.
Hardware Specifications
The specifications for the MCS-7830 are as follows:
• Pentium III, 500 MHz, 512Kbyte Cache RAM
• 256 MByte ECC SDRAM
• Two hot-swappable 9.1 GByte hard drives (10,000 RPM)
• Two redundant power supplies
• Compaq Remote Insight Board with LAN and serial port
• Compaq Smart Array Controller 221
• Compaq Rack Mount Kit
The following items are included as standard with the MCS-7830:
• 10/100 TX, RJ-45
• SCSI-2 (Ultra-Wide), Internal
• 5U rack mount box
• Five available 32-bit PCI slots
• One serial port on the back panel
• One printer port
• One PS/2-type keyboard port
• One PS/2-type mouse port
• One VGA port
Note A monitor, keyboard, and mouse are not supplied with the Cisco Media Convergence
Server 7830. You must supply a monitor, keyboard, and mouse to use during initial startup and
configuration of the MCS-7830 and Cisco CallManager.