Filter
Top Products
4 Configuration Notes for Cisco Media Convergence Server 7830
Configuring the Cisco Media Convergence Server 7830
Table 1 Configuration Data for Cisco Media Convergence Server 7830
Configuration Data Your Entry
Your name.
The name of your organization.
Product ID. This is the ID number found on the Windows NT Certificate of
Authenticity shipped with the MCS-7830.
Computer name. This is a unique network name for the MCS-7830. The
name must conform to Windows NT naming conventions.
How will the server participate on the network?
• Do not connect at this time.
• Computer will participate in one of the following ways:
— Wired to the network (ISDN or network adapter)
— Remote access (modem)
DHCP parameters. Cisco recommends that you program a fixed IP address for the
server through TCP/IP properties instead of using DHCP.
SNMP properties.
• For Agent, you can set the following:
— Contact
— Location
— Service (Physical, Applications, Datalink/Subnetwork, Internet,
End-to-End)
• For Traps, you can set the following:
— Community name
— Trap destinations
• For Security, you can set the following:
— Send authentication trap
— Accepted community names
— Accept SNMP packets from any host
— Accept SNMP packets only from selected hosts