Filter
Top Products
Configuration Notes for Cisco Media Convergence Server 7830 9
Configuring Cisco CallManager
Configuring Cisco CallManager
When you power up and configure the Cisco Media Convergence Server 7830, Cisco CallManager
is installed automatically. However, you must set some configuration parameters and install the
optional plug-ins for Cisco CallManager before you can begin using it. This section explains how to
configure Cisco CallManager and install the plug-ins.
Setting Up Internet Explorer
When you first access Cisco CallManager on the MCS-7830, you are prompted for information to
set up an internet connection through Internet Explorer. To configure an internet connection,
complete these steps:
Step 1 Click Start>Programs>Cisco CallManager>CallManager Administration.
Step 2 Click Next to start the Internet Connection Wizard.
Step 3 If you want to set up an internet connection at this time, select the appropriate option and
enter the required information at the prompts. Otherwise, select the option that says, “I
already have an Internet connection set up on this computer and I do not want to change
it.” Then click Next.
Step 4 Click Finish to close the Wizard.
When you finish setting up an internet connection, the Cisco CallManager Administration window
displays. You can then begin configuring Cisco CallManager.
Configuring Auto Registration
Auto Registration is a Cisco CallManager feature that automatically assigns directory numbers to
phones as the phones are connected to the network. If you want to use Auto Registration, you must
first set a range of directory numbers for Auto Registration.
To set a range of directory numbers for Auto Registration, complete these steps:
Step 1 In the Cisco CallManager Administration window, click Configuration and System.
Step 2 Scroll down to Auto Registration and click the Configure button.
Step 3 Enter a range of directory numbers to use for Auto Registration. Click Update and then
click Continue.
For more information about Auto Registration, refer to the online System Guide by clicking Help or
by going to:
http://www.cisco.com/documentation/ccm/v24/index.htm