Filter
Top Products
8
Note Wait at least 20 seconds before reconnecting an access point to the controller. Otherwise, the
controller may fail to detect the device.
Figure 3 shows the back panel and identifies its components. Table 2 describes the back panel
components.
Figure 3 Controller Back Panel and Components
Table 2 Controller Back Panel and Component Descriptions
Ports and Slots State and Description
POWER 48VDC The 48 V input power is provided via an external
AC/DC adapter. Power is provided to the system board
from the 48 VDC input. There is enough power
available to power the system board plus two 802.3af
PoE devices.
Note The Cisco 2106 power adapter is not
compatible with a 2504 controller.
Cable Lock slot Security locking slot.
282250
POWER 48VDC
Cable Lock
Slot